update aerospace config

aerospace.toml

@@ -0,0 +1,191 @@
+# Place a copy of this config to ~/.aerospace.toml
+# After that, you can edit ~/.aerospace.toml to your liking
+
+# You can use it to add commands that run after login to macOS user session.aeros.
+# 'start-at-login' needs to be 'true' for 'after-login-command' to work
+# Available commands: https://nikitabobko.github.io/AeroSpace/commands
+after-login-command = []
+
+# You can use it to add commands that run after AeroSpace startup.
+# 'after-startup-command' is run after 'after-login-command'
+# Available commands : https://nikitabobko.github.io/AeroSpace/commands
+after-startup-command = []
+
+# Start AeroSpace at login
+start-at-login = false
+
+# Normalizations. See: https://nikitabobko.github.io/AeroSpace/guide#normalization
+enable-normalization-flatten-containers = true
+enable-normalization-opposite-orientation-for-nested-containers = true
+
+# See: https://nikitabobko.github.io/AeroSpace/guide#layouts
+# The 'accordion-padding' specifies the size of accordion padding
+# You can set 0 to disable the padding feature
+accordion-padding = 30
+
+# Possible values: tiles|accordion
+default-root-container-layout = 'tiles'
+
+# Possible values: horizontal|vertical|auto
+# 'auto' means: wide monitor (anything wider than high) gets horizontal orientation,
+#               tall monitor (anything higher than wide) gets vertical orientation
+default-root-container-orientation = 'auto'
+
+# Possible values: (qwerty|dvorak)
+# See https://nikitabobko.github.io/AeroSpace/guide#key-mapping
+key-mapping.preset = 'qwerty'
+
+# Gaps between windows (inner-*) and between monitor edges (outer-*).
+# Possible values:
+# - Constant:     gaps.outer.top = 8
+# - Per monitor:  gaps.outer.top = [{ monitor.main = 16 }, { monitor."some-pattern" = 32 }, 24]
+#                 In this example, 24 is a default value when there is no match.
+#                 Monitor pattern is the same as for 'workspace-to-monitor-force-assignment'.
+#                 See: https://nikitabobko.github.io/AeroSpace/guide#assign-workspaces-to-monitors
+[gaps]
+inner.horizontal = 0
+inner.vertical =   0
+outer.left =       0
+outer.bottom =     0
+outer.top =        0
+outer.right =      0
+
+# 'main' binding mode declaration
+# See: https://nikitabobko.github.io/AeroSpace/guide#binding-modes
+# 'main' binding mode must be always presented
+# Fallback value (if you omit the key): mode.main.binding = {}
+[mode.main.binding]
+
+# All possible keys:
+# - Letters.        a, b, c, ..., z
+# - Numbers.        0, 1, 2, ..., 9
+# - Keypad numbers. keypad0, keypad1, keypad2, ..., keypad9
+# - F-keys.         f1, f2, ..., f20
+# - Special keys.   minus, equal, period, comma, slash, backslash, quote, semicolon, backtick,
+#                   leftSquareBracket, rightSquareBracket, space, enter, esc, backspace, tab
+# - Keypad special. keypadClear, keypadDecimalMark, keypadDivide, keypadEnter, keypadEqual,
+#                   keypadMinus, keypadMultiply, keypadPlus
+# - Arrows.         left, down, up, right
+
+# All possible modifiers: cmd, alt, ctrl, shift
+
+# All possible commands: https://nikitabobko.github.io/AeroSpace/commands
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#exec-and-forget
+# You can uncomment the following lines to open up terminal with alt + enter shortcut (like in i3)
+# alt-enter = '''exec-and-forget osascript -e '
+# tell application "Terminal"
+#     do script
+#     activate
+# end tell'
+# '''
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#layout
+alt-slash = 'layout tiles horizontal vertical'
+alt-comma = 'layout accordion horizontal vertical'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#focus
+alt-h = 'focus left'
+alt-j = 'focus down'
+alt-k = 'focus up'
+alt-l = 'focus right'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#move
+alt-shift-h = 'move left'
+alt-shift-j = 'move down'
+alt-shift-k = 'move up'
+alt-shift-l = 'move right'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#resize
+alt-shift-minus = 'resize smart -50'
+alt-shift-equal = 'resize smart +50'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#workspace
+alt-1 = 'workspace 1'
+alt-2 = 'workspace 2'
+alt-3 = 'workspace 3'
+alt-4 = 'workspace 4'
+alt-5 = 'workspace 5'
+alt-6 = 'workspace 6'
+alt-7 = 'workspace 7'
+alt-8 = 'workspace 8'
+alt-9 = 'workspace 9'
+alt-a = 'workspace A' # In your config, you can drop workspace bindings that you don't need
+alt-b = 'workspace B'
+alt-c = 'workspace C'
+alt-d = 'workspace D'
+alt-e = 'workspace E'
+alt-f = 'workspace F'
+alt-g = 'workspace G'
+alt-i = 'workspace I'
+alt-m = 'workspace M'
+alt-n = 'workspace N'
+alt-o = 'workspace O'
+alt-p = 'workspace P'
+alt-q = 'workspace Q'
+alt-r = 'workspace R'
+alt-s = 'workspace S'
+alt-t = 'workspace T'
+alt-u = 'workspace U'
+alt-v = 'workspace V'
+alt-w = 'workspace W'
+alt-x = 'workspace X'
+alt-y = 'workspace Y'
+alt-z = 'workspace Z'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#move-node-to-workspace
+alt-shift-1 = 'move-node-to-workspace 1'
+alt-shift-2 = 'move-node-to-workspace 2'
+alt-shift-3 = 'move-node-to-workspace 3'
+alt-shift-4 = 'move-node-to-workspace 4'
+alt-shift-5 = 'move-node-to-workspace 5'
+alt-shift-6 = 'move-node-to-workspace 6'
+alt-shift-7 = 'move-node-to-workspace 7'
+alt-shift-8 = 'move-node-to-workspace 8'
+alt-shift-9 = 'move-node-to-workspace 9'
+alt-shift-a = 'move-node-to-workspace A'
+alt-shift-b = 'move-node-to-workspace B'
+alt-shift-c = 'move-node-to-workspace C'
+alt-shift-d = 'move-node-to-workspace D'
+alt-shift-e = 'move-node-to-workspace E'
+alt-shift-f = 'move-node-to-workspace F'
+alt-shift-g = 'move-node-to-workspace G'
+alt-shift-i = 'move-node-to-workspace I'
+alt-shift-m = 'move-node-to-workspace M'
+alt-shift-n = 'move-node-to-workspace N'
+alt-shift-o = 'move-node-to-workspace O'
+alt-shift-p = 'move-node-to-workspace P'
+alt-shift-q = 'move-node-to-workspace Q'
+alt-shift-r = 'move-node-to-workspace R'
+alt-shift-s = 'move-node-to-workspace S'
+alt-shift-t = 'move-node-to-workspace T'
+alt-shift-u = 'move-node-to-workspace U'
+alt-shift-v = 'move-node-to-workspace V'
+alt-shift-w = 'move-node-to-workspace W'
+alt-shift-x = 'move-node-to-workspace X'
+alt-shift-y = 'move-node-to-workspace Y'
+alt-shift-z = 'move-node-to-workspace Z'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#workspace-back-and-forth
+alt-tab = 'workspace-back-and-forth'
+# See: https://nikitabobko.github.io/AeroSpace/commands#move-workspace-to-monitor
+alt-shift-tab = 'move-workspace-to-monitor --wrap-around next'
+
+# See: https://nikitabobko.github.io/AeroSpace/commands#mode
+alt-shift-semicolon = 'mode service'
+
+# 'service' binding mode declaration.
+# See: https://nikitabobko.github.io/AeroSpace/guide#binding-modes
+[mode.service.binding]
+esc = ['reload-config', 'mode main']
+r = ['flatten-workspace-tree', 'mode main'] # reset layout
+f = ['layout floating tiling', 'mode main'] # Toggle between floating and tiling layout
+backspace = ['close-all-windows-but-current', 'mode main']
+
+# sticky is not yet supported https://github.com/nikitabobko/AeroSpace/issues/2
+#s = ['layout sticky tiling', 'mode main']
+
+alt-shift-h = ['join-with left', 'mode main']
+alt-shift-j = ['join-with down', 'mode main']
+alt-shift-k = ['join-with up', 'mode main']
+alt-shift-l = ['join-with right', 'mode main']

nvim/init.lua

@@ -307,6 +307,9 @@ function setup_plugins()
 			css = {
 				require("formatter.filetypes.css").prettier,
 			},
+			rust = {
+				require("formatter.filetypes.rust").rustfmt,
+			},
 			astro = {
 				function()
 					return {
@@ -323,6 +326,7 @@ function setup_plugins()
 				end,
 			},
 			lua = { require("formatter.filetypes.lua").stylua },
+			c = { require("formatter.filetypes.c").clangformat },
 			cpp = { require("formatter.filetypes.cpp").clangformat },
 			dart = { require("formatter.filetypes.dart").dartformat },
 			python = { require("formatter.filetypes.python").black },
@@ -394,6 +398,7 @@ function setup_plugins()
 			{ name = "nvim_lsp" },
 			{ name = "luasnip" },
 			{ name = "buffer" },
+			{ name = "nvim_lsp_signature_help" },
 		}),
 	})
 
@@ -447,6 +452,17 @@ function config_vim()
 	vim.opt.pumheight = 10
 	vim.opt.scrolloff = 10
 	vim.opt.listchars = {}
+	vim.opt.termguicolors = true
+
+	vim.o.guifont = "CommitMono Nerd Font:h14"
+
+	vim.g.neovide_position_animation_length = 0
+	vim.g.neovide_cursor_animation_length = 0.00
+	vim.g.neovide_cursor_trail_size = 0
+	vim.g.neovide_cursor_animate_in_insert_mode = false
+	vim.g.neovide_cursor_animate_command_line = false
+	vim.g.neovide_scroll_animation_far_lines = 0
+	vim.g.neovide_scroll_animation_length = 0.00
 
 	vim.filetype.add({
 		extension = {
@@ -515,6 +531,7 @@ PLUGINS = {
 	{ "hrsh7th/cmp-path" },
 	{ "hrsh7th/cmp-cmdline" },
 	{ "hrsh7th/nvim-cmp" },
+	{ "hrsh7th/cmp-nvim-lsp-signature-help" },
 	{ "mhartington/formatter.nvim" },
 	{
 		"L3MON4D3/LuaSnip",

nvim/lazy-lock.json

@@ -5,6 +5,7 @@
   "cmp-buffer": { "branch": "main", "commit": "3022dbc9166796b644a841a02de8dd1cc1d311fa" },
   "cmp-cmdline": { "branch": "main", "commit": "d250c63aa13ead745e3a40f61fdd3470efde3923" },
   "cmp-nvim-lsp": { "branch": "main", "commit": "39e2eda76828d88b773cc27a3f61d2ad782c922d" },
+  "cmp-nvim-lsp-signature-help": { "branch": "main", "commit": "031e6ba70b0ad5eee49fd2120ff7a2e325b17fa7" },
   "cmp-path": { "branch": "main", "commit": "91ff86cd9c29299a64f968ebb45846c485725f23" },
   "formatter.nvim": { "branch": "master", "commit": "ad246d34ce7a32f752071ed81b09b94e6b127fad" },
   "gitsigns.nvim": { "branch": "main", "commit": "4a143f13e122ab91abdc88f89eefbe70a4858a56" },